WARRANTY, RETURNS & BOARD CARE GUIDE
Last Updated: 01/11/2026
Australian Consumer Law
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law (ACL).
You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Nothing in this Warranty, Returns & Board Care Guide excludes, restricts or modifies any rights you may have under the Australian Consumer Law.
WARRANTY
At Solution Bodyboards, we use quality materials and controlled manufacturing processes to produce bodyboards designed for recreational and performance bodyboarding. All products are inspected prior to dispatch.
Warranty Coverage
Solution Bodyboards provides a three (3) month limited warranty from the date of original purchase against defects in materials and workmanship.
This warranty applies only to the original purchaser and is not transferable.
Snapped Boards
Bodyboarding is a high-impact action sport that places significant stress on equipment.
Bodyboards are designed to flex under load and may crease, buckle or snap due to wave forces, rider weight, rider technique, impacts, landing forces and general use.
A snapped board is not, by itself, evidence of a manufacturing defect.
For this reason, snapped boards are not automatically covered under this voluntary warranty.
Any claim involving a snapped board will be assessed on a case-by-case basis to determine whether the failure resulted from a defect in materials or workmanship.
Where a board has failed due to impacts, wave forces, rider loading, misuse, accidents, heavy landings, shore-break conditions or other non-manufacturing causes, the claim will not be covered under this warranty.
Nothing in this clause affects your rights under the Australian Consumer Law.
What This Warranty Does Not Cover
This warranty does not cover:
- Normal wear and tear.
- Pressure dents, deck compression and creasing.
- Cosmetic damage including scratches, scuffs, fading or discoloration.
- Damage caused by impacts with sandbanks, reef, rocks, jetties, sea walls or other hard objects.
- Snapped, buckled or creased boards resulting from use, impacts, rider loading or wave forces.
- Heat damage resulting from leaving a board in a vehicle, enclosed trailer or direct sunlight.
- Delamination, bubbling or warping caused by excessive heat.
- Water ingress resulting from punctures, cuts or impact damage.
- Damage caused by improper transport, storage or handling.
- Damage associated with leash plugs, leashes or accessories installed after purchase.
- Commercial, rental, coaching or instructional use.
- Products modified, repaired or altered by unauthorised persons.
- Second-hand products.
- Products sold as seconds or clearance items with disclosed defects.
Warranty Claims
All warranty claims must be submitted directly to Solution Bodyboards.
To make a claim, please provide:
- Proof of purchase.
- Order number.
- Description of the issue.
- Photographs clearly showing the problem.
The product may be required to be returned for inspection before a warranty decision is made.
If a warranty claim is approved, Solution Bodyboards may, at its discretion and subject to Australian Consumer Law:
- Repair the product;
- Replace the product; or
- Refund the product.
CUSTOM BODYBOARDS
Solution Bodyboards manufactures custom boards to customer-specified dimensions and configurations.
Due to the handmade nature of the manufacturing process, the following tolerances apply:
- Board length: ± 1/4 inch (6.35mm)
- Nose, wide point & Tail width: ± 1/4 inch (6.35mm)
- Thickness: ± 2mm
These tolerances are considered acceptable manufacturing variation and do not constitute a defect.
Deposits
A non-refundable deposit is required before production commences.
The deposit covers materials, labour, design work and manufacturing costs specifically incurred for the custom order.
Custom Order Cancellations
Once production has commenced:
- Deposits are non-refundable.
- Custom orders cannot be cancelled due to change of mind.
- Custom orders cannot be refunded because a customer no longer wants the product.
- Custom orders cannot be refunded for customer-approved colours, artwork, designs or dimensions.
Nothing in this section limits your rights under Australian Consumer Law where a product has a major fault or does not meet applicable consumer guarantees.
RETURNS
Change of Mind Returns
For standard stock bodyboards and accessories purchased directly from Solution Bodyboards, we offer a 14-day change-of-mind return period.
To qualify:
- Product must be unused.
- Product must be in original condition.
- Original packaging must be included.
- Proof of purchase must be provided.
Return shipping costs are the responsibility of the customer.
Original shipping costs are non-refundable.
Non-Returnable Items
The following cannot be returned for change of mind:
- Custom-made bodyboards.
- Products that have been used in the water.
- Boards with wax applied.
- Damaged products.
- Products altered after delivery.
- Clearance or seconds products where defects were disclosed.
BOARD CARE GUIDE
Proper care will significantly extend the life of your board.
Heat & Sun Protection
Avoid Hot Vehicles
Never leave your bodyboard inside a hot vehicle, enclosed trailer or car boot.
Excessive heat can weaken adhesive bonds and cause delamination, bubbling, warping and permanent damage.
Keep Your Board Shaded
Avoid prolonged exposure to direct sunlight when not riding.
Extended heat exposure can cause the board core to expand and may distort the rocker profile.
Use a Cover or Towel
When at the beach, store the board in the shade whenever possible.
If shade is unavailable, cover the board with a light-coloured towel or wetsuit.
Washing & Cleaning
Rinse After Every Session
Always rinse your board with fresh water after use to remove salt, sand and other contaminants.
Clean New Boards
Before your first surf, wipe the deck and rails with fresh water and a clean cloth to remove any manufacturing residue.
Removing Wax
Old wax can be removed using warm water and a plastic scraper.
Avoid using sharp tools, solvents or harsh chemicals.
Storage & Handling
Store Flat
Store your bodyboard flat whenever possible.
Alternatively, stand it vertically on its nose.
Avoid standing the board on its tail for extended periods.
Avoid Heavy Loads
Do not stack heavy objects on top of your bodyboard.
Excessive pressure can permanently deform the core.
Remove Leashes During Long-Term Storage
Removing the leash can help prevent pressure marks and indentations.
Avoid Sharp Impacts
Do not drag your board across concrete, asphalt or rough surfaces.
Avoid contact with rocks, reefs and other hard objects whenever possible.
CONTACT US
Solution Bodyboards
Email: solutionbodyboards@gmail.com
Phone: 0422 732 999
For all warranty enquiries, returns and product support, please contact us using the details above.
